How to Assemble the Gas Barbeque from Morsø

Assembly Instructions

Get a nice start with your new Morsø gasgrill

1. Open the lid on the grill

2. Mount the handle with a screw on each side - remember the rubber rings and washers

3. Close the grill and place the thermometer

4. Hold on the thermometer while you're opening the grill again

5. Screw the nut on the thermometer inside the grill

6. Place the three-piece molding grate in the grill

7. Place the drip tray on the back of the grill

How to assemble the gas grill

Connecting of gas to the gasgrill

1. Heat the hose in warm water to make the installation easier

2. Attach the strap to the hose and mount it on the socket at the back of the grill. Be aware that the hose must be PULLED over the socket.

3. Push the strap up and then tighten it over the plug

4. Repeat this when mounting the hose on the gas controller

5. Lift the black ring on the gas-controller and press down on the gas valve on the gas bottle

Connecting gas to the gas grill

This guide is only for the Medio-size of gasgrill

1. The table is turned on the side

2. Make the needed holes for screws with a screwdriver

3. Place the grill on the table. Make sure the holes in the table are facing the screw holes in the grill

4. Install both screws from below and tighten.

Mounting the Forno medio on a Tavolo table

This guide is only for Forno Gas Piccolo and Grande-size

1. Mount the 2 plastic cones on the table

2. The grill is placed on the table. Make sure that the cones are fitting into the cone holes on the grill

3. Mount the safety screw from below and tighten it

Mounting of Piccolo- and the grande gas on a Tavolo table