Heatstrip Design 2400 with remote

Cable bracket (black) for Heatstrip Design patio heaters

Cable bracket for Heatstrip Design patio heaters, comes in the colour black. If the aim is a flexible patio heater, then this is the perfect choice. The cable bracket allows for the heater to be installed via an elevated cable, making it easy to move it freely.

Features

• Allows for a movable patio heater
• Compatible with Heatstrip Design 1500, 2400 and 3200

The purchase includes 2 cable brackets. 

Wall bracket for Heatstrip Design patio heater in black

Highlighted features

• Mounts on a wall

Suitable for

• Design 2400 with remote control
• Design 2400 with remote control and app
• Design 3200 with remote control
• Design 3200 with remote control and app

Heatstrip Design 2400 Flush Mount Enclosure

This flush mount enclosure is used with the Heatstrip Design 2400 for mounting it seamlessly into ceilings. By using this flush mount enclosure, it is possible to integrate the heater smoothly into the ceiling and preventing it from taking unnecessary space on the floor.

It is recommended to clean the flush mount enclosure once every three months. This is due to potential filth and grime may accumulate in it. In case smoking takes place near the heater, it may be necessary to clean it more often. Cleaning it can be done with a wet cloth without the use of strong cleaning agents.

Features

• Designed for use indoors and outdoors
• Easy to install
• Designed for the Heatstrip Design 2400
• Hole cutout dimensions: 139 x 24 cm
• Screws for mounting not included

 Installation

When installing the flush mount enclosure, it is important that wires, insulation or other flammable materials are not in direct contact with it.

• Recommended mounting height: 2.3-2.5 metres
• Maximum mounting height: 2.7 metres

If the heater is installed at a height greater than the maximum, the efficiency of the heater can diminish.

The manual includes more elaborate descriptions when installing the flush mount enclosure.

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Portable mount for Heatstrip Design

Portable mount designed for Heatstrip heaters. With this mount, it is possible to move a heater around to one's liking, quick and easy. Use this mount with heaters to avoid drilling in walls/ceilings.

Features

• Can be used indoors and outdoors
• High quality
• Wheels attached to mount, allowing for easy transportation

 Included in delivery

• Mount
• Wheels

NOTE: heater must be bought separately. 

Installation

It is recommended to only use the mount for 1800W, 2200W and 2400W heaters, as these can be installed at your own discretion. Heaters with greater amperage must thereby be installed by a licensed electrician.

 In the case of bigger heaters, it is recommended to take the weight into account when installing it, as they may require to be mounted on the floor with screws to ensure stability (screws must be bought separately).