Murus 1600 - Glossy White

Murus 1600 Wall Mounted Bio Fireplace in Glossy White

Murus is our series of wall mounted bioethanol fireplaces, all equipped with a manual slimline burner. The narrow form factor on the burner means that the fireplace itself is thin and thus only protrudes minimally from the wall.

Here you get the Murus 1600 in a stylish glossy white colour. The fireplace is made of 4 mm thick powder-coated steel and a white frame. The white coloured frame creates a nice surrounding for the flames of the bio fireplace which are clearly visible in front of the black back of the fireplace.

The front frame of the fireplace can easily and quickly be changed to a different colour, if you want to renew the look of the fireplace at a later date. The frames are available in black, glossy white, matte white and brushed steel.

As Murus has a depth of only 16.5 cm, it is not recommended to use decoration wood or stones in the fireplace - since there is not enough room to place it around the flames.

Slimline Burner

Included are two burners for the Murus 1600. Both burners are our 60 cm slimline manual burner.

The burner has a fuel capacity of 3.0 litres each and a complete refilling will make beautiful flames for up to 7 hours. It is possible to adjust the flame level and heat output using the supplied operating tool.

The recommended fuel is bioethanol with an alcohol percentage of 95% - 97.5%

Highlighted Features

• Wall-mounted bioethanol fireplace
• Depth of only 16.5 cm
• Up to 7 hours burning time per refill
• The front frame can be replaced with another colour (optional)
• Back-frame can be built into wall
• No chimney, electricity, or flue system required

Included in the package

• Murus 1600 back-frame
• Murus 1600 front frame (glossy white)
• 2x Slimline burner (3.0 litres)
• Operating tool
• Brackets for wall mounting
• User manual

Murus as built-in fireplace

It is possible to build the rear part of the Murus fireplace into the wall and thus use the fireplace as a 1-sided built-in bio fireplace. When installing the into a wall made of flammable materials, it is recommended to insulate around the rear frame with e.g., heat/fire-resistant plasterboard or similar non-combustible materials.