Heatstrip Intense 2200 Watt

Portable mount for Heatstrip Design

Portable mount designed for Heatstrip heaters. With this mount, it is possible to move a heater around to one's liking, quick and easy. Use this mount with heaters to avoid drilling in walls/ceilings.

Features

• Can be used indoors and outdoors
• High quality
• Wheels attached to mount, allowing for easy transportation

 Included in delivery

• Mount
• Wheels

NOTE: heater must be bought separately. 

Installation

It is recommended to only use the mount for 1800W, 2200W and 2400W heaters, as these can be installed at your own discretion. Heaters with greater amperage must thereby be installed by a licensed electrician.

 In the case of bigger heaters, it is recommended to take the weight into account when installing it, as they may require to be mounted on the floor with screws to ensure stability (screws must be bought separately). 

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Extension mount bracket to Heatstrip Elegance

The extension brackets designed for Heatstrip Elegance will help you to hang the heater exact where you want it to be. The brackets are available with 25 x 25 x 1mm tubes, and can only be supplied as fitting for adjustments to the length or the cut. They can also be supplied as a complete set of fitting, pre-cuts rods and connectors.

• Available in different lengths (150mm, 300mm, 600mm and 1200mm).
• The mount brackets contain brackets, rods and screws.

Flush mount enclosure for Heatstrip Intense

Flush mount enclosure designed for seamless installation of Heatstrip Intense. This discrete flush mount enclosure makes it easier to install a Heatstrip Intense patio heater in the roof, allowing for an even-surface where the heater is elegantly leveled with the rest of the ceiling.

Features

• Designed for use indoors and outdoors
• Ready to be installed after delivery

Included in delivery

• Black flush mount enclosure

Installation

The flush mount enclosure can be used in ceilings made of drywall or wood.

• Recommended mounting height: 2.3-2.5 metres
• Maximum mounting height: 2.8 metres in an enclosed area outdoors

If the heater is installed at a height greater than the maximum, the efficiency of the heater can diminish.

NOTE: the Heatstrip intense must be bought separately. Find it here

Switch and remote control with timer for Heatstrip

Make the operation of Heatstrip heaters easier with remote control. With the remote and switch, you are able to time, as well as turn on/off, all of your Heatstrip patio heaters every 1, 2 or 4 hours. The remote control has a range of 10 meters, making it easy to switch a heater on without having to move.

This remote control can be used for one or more Heatstrip patio heaters, as long as the total power usage does not exceed 16 amps and 220-240V.

Features

• Timer function: 1, 2, or 4 hours
• Can be used for multiple Heatstrip heating units
• Switch can be installed by a licensed electrician
• Must be installed a place without humidity

Included in delivery

• Remote controller
• Wall switch

Remote timer

The remote control allows the heating unit to be switched on/off, has a timer and 3 heat settings: high (100%), medium (70%) and low heat (40%). Additionally, it is possible to set a timer for your heater, allowing it to automatically turn on/off after 1, 2 or 4 hours.

Features

• Select heat settings between: High (100%), Medium (70%) and Low (40%).
• Automatic timer control e.g. 1, 2 or 4 hours.
• Can also be used for multiple heaters.
• Remote control included.
• Must be installed by a licensed electrician.

Included in delivery

• Remote controller
• Control panel for wall