Forma 2700 Right Corner

Planika Forma 2700 Right Corner

Planika Forma 2700 Right Corner is a fireplace for installation in a right corner where the flames can be seen from two sides. A minimum room size of 225 m3 is recommended for this fireplace.

Please note that this Forma fireplace is oriented to the right. This means that the fireplace is open at the front and on the right side when you look at it from the front.

Bioethanol burner

With the Forma 2700 Right Corner, you can choose between 2 automatic combustion chambers:

• Planika FLA4 - up to 10 hours burning time with a full filling.
• Planika FLA4+ - up to 31 hours burning time with a full charge

Both fireplaces have a remote control as well as the possibility of control via WiFi and Smart Home System. They also feature Planika's BEV technology, which makes combustion cleaner by burning vaporised bioethanol. In addition, all Planika products have a wide range of safety sensors such as a tilt sensor, 3 temperature sensors, an overfill sensor and a CO2 sensor. All these sensors make Planika's fire pots incredibly safe to use.

Materials

Planika Forma 2700 Right Corner is made of galvanised steel, which is powder-coated black, and tempered glass. This gives the fireplace a simple and timeless design that will last for many years. The glass not only looks good, but also protects the flames from draughts and small gusts of wind, which contributes to a more stable flame.

Included in the package are

• Automatic bioethanol fireburner (FLA4 or FLA4+)
• Planika Forma 2700 Right Corner frame
• Tempered safety glass
• Brackets for glass
• Remote control

Installing Forma

Installing Planika Forma is relatively easy if you have some technical understanding and does not require any special certification. You are therefore welcome to carry out the installation yourself.

If you are installing the fireplace in a combustible wall, you should insulate between the fireplace and the wall. For this we recommend thermal insulation boards such as. Skamotec fire wall panels, Fermacell panels or fire plaster. Also remember to supply the fireplace with electricity, as all automatic fireplaces must be connected to the mains.

•   The wall above the fireplace must be self-supporting
•   Use fireproof material around the fireplace
•   Connect the electricity
•   Install on a flat surface