Forma 1200 Left Corner

Planika Forma 1200 Left Corner

Planika Forma 1200 Left Corner is a fireplace for installation in a left corner where the flames can be seen from two sides. A minimum room size of 70 m3 is recommended for this fireplace.

Please note that this Forma fireplace is oriented to the left. This means that the fireplace is open at the front and on the left side when viewed from the front.

Bioethanol Burner

For Forma 1200 Left Corner, it is possible to choose between two of Planika's automatic BEV^TM bioethanol burners:

• Planika FLA4 - with up to 8 hours of burn time per refill
• Planika FLA4+ - with up to 26 hours of burn time per refill

Both fireplaces have a remote control as well as the possibility of control via WiFi and Smart Home System. They also feature Planika's BEV technology, which makes combustion cleaner by burning vaporised bioethanol. In addition, all Planika products have a wide range of safety sensors such as a tilt sensor, 3 temperature sensors, an overfill sensor and a CO2 sensor. All these censors make Planika's bioethanol burner incredibly safe to use.

Materials

Planika Forma 1200 Left Corner is made of galvanised steel, which is powder-coated black, and tempered glass. This gives the fireplace a simple and timeless design that will last for many years. The glass not only looks good, but also protects the flames from draughts and small gusts of wind, which contributes to a more stable flame.

Included in delivery

• Automatic bioethanol burner(FLA4 or FLA4+)
• Planika Forma 1200 Left Corner frame
• Tempered safety glass
• Brackets for glass
• Remote control

Installing Forma

Installing Planika Forma is relatively easy if you have a little technical skill, and does not require any special certification. You are therefore welcome to carry out the installation yourself.

If you are installing the fireplace in a combustible wall, you should insulate between the fireplace and the wall. For this we recommend thermal insulation boards such as. Skamotec fire wall panels, Fermacell panels or fire plaster. Also remember to supply the fireplace with electricity, as all automatic fireplaces must be connected to the mains.

• The wall above the fireplace must be self-supporting
• Use fireproof material around the fireplace
• Connect the electricity
• Install on a flat surface