Heatstrip™ Elegance 2400W
The elegant heater from Heatstrip is a fantastic solution as an outdoor heating source. This Heatstrip Elegance is suitable for both indoor and outdoor use, as well as for private and commercial settings. The narrow white exterior of the Heatstrip does not light up or glow during use, which means it blends well with white/light ceilings. The option for mounting on ceilings and walls ensures that floor and table spaces are not wasted.
Elegance 2400W can heat an open outdoor area of 4 square meters, a closed outdoor area of 4.8 square meters, and an indoor area of approximately 6 square meters.
Highlighted Features
- Easy DIY installation with the included bracket.
- Ideal for outdoor areas, pergolas, verandas, or cafes.
- IP55 rated
- Requires 10 amps
Included in the Package
- Heatstrip Elegance 2400
- 100 cm cord
- White standard brackets for mounting on flat/sloped ceilings or walls
Installation
The Elegance patio heater is easily and quickly installed with the included brackets, which can be used for ceiling or wall mounting. The bracket is flexible and can be tilted up to 45 degrees. If additional units are desired, they can be placed end-to-end.
This Heatstrip Elegance patio heater includes one meter of cord. Elegance 1800 and 2400 come with a plug and can be connected directly to a socket. The 3600W model needs to be installed by an electrician.
Note: This patio heater can be installed by private individuals.
Mounting Heights including Brackets
The mounting height of the patio heater can significantly affect the heater's efficiency. In areas with higher ceilings, it is recommended to use extension rods or chains.
- Minimum mounting height: 2.1 m.
- Maximum mounting height: 2.7 m.
- Recommended mounting height: 2.2-2.5 m.
Note: Chains and extension rods for hanging are sold separately.
Operation of the Heater
The Elegance 2400 is turned on/off via a switch/socket. Alternatively, a remote control can be purchased: