Heatstrip Classic 1500W - Electric Patio Heater (UK Version)

Heatstrip Classic 1500W - Electric Patio Heater

The Heatstrip Classic 1500W is a slimline electric radiant heater for protected outdoor areas such as pergolas, verandas, alfresco areas and cafes, as well as hard-to-heat indoor spaces like garages and sheds. Its unobtrusive design with a black front profile and off-white body blends in with most settings.

The Classic uses radiant heat, which warms people and objects directly rather than the air. This gives a gentle, efficient warmth that is not blown away by a breeze, and it can be mounted directly above the area you want to heat, for example a dining table or seating area.

Highlighted features

• 1500 W electric radiant heater, 7.5 A
• Supplied with a 1 m cable and plug for easy DIY installation
• Heats around 3-4 m²
• IP55 rated, with corrosion protection for demanding environments
• High-temperature ceramic-coated extruded alloy body
• Standard mounting bracket included
• Slimline design: 1104 x 165 x 48 mm, weight 6 kg
• Designed and engineered in Australia

Heating Area

Based on direct overhead mounting at 2.4 m:

• Indoor protected area: approx. 4.5 m²
• Outdoor enclosed area: approx. 3.6 m²
• Outdoor exposed area: approx. 3 m²

For outdoor use, shelter the heater from wind with walls, café blinds or screens for the best result. The heating area is reduced by up to 40% when the heater is mounted at an angle on a wall.

Installation and mounting

The standard bracket can be used for ceiling or wall mounting and can also be used to suspend the heater from chains or wires (chains and wires are not included). The heater can also be installed flush with the ceiling, on beams or poles, on umbrellas, end to end, or as two units side by side.

• Minimum mounting height: 2.1 m
• Recommended mounting height: 2.2-2.5 m
• Maximum mounting height: 2.7 m (in a fully enclosed outdoor area)

For higher ceilings, optional extension poles or chains can be used to bring the heater down to the recommended height. The heating surface must never be directed towards the ceiling, and when mounted at an angle the maximum angle is 30 degrees. The electrical connection should be located outside the physical footprint of the heater, and at the lowest point if the heater is mounted on an incline.

Included in the package

• Heatstrip Classic 1500W electric heater with 1 m cable and plug
• Standard mounting bracket
• Installation manual

Note: Controllers, extension poles, chains and wires are sold separately.